Characterizing Hydrogeological Change From Oil And Gas Development In The Western Canada Sedimentary Basin

Joel Steeves, Grant Ferguson

Dans les comptes rendus d’articles de la conférence: GeoEdmonton 2018: 71st Canadian Geotechnical Conference; 13th joint with IAH-CNC

Session: Mining, Energy Development and Groundwater I

ABSTRACT: The Western Canada Sedimentary Basin (WCSB) has been extensively developed for oil and gas production and still hosts large reserves of oil and gas. Remaining reserves are likely to require various stimulation techniques. The WCSB also has significant potential for carbon sequestration, waste isolation and geothermal energy and contains large stores of fresh groundwater. Future development needs to consider how historical development both informs and constrains future developments. Oil and gas development may provide key hydrogeological data for these projects but legacy impacts, such as hydraulic fracturing, leaky wells and injection of produced water, create challenges with subsurface characterization and engineering design. Legacy impacts can be grouped into four main areas of impact: changes in pressure, changes in temperature, changes in chemistry and changes in permeability. Changes in pressure, temperature and chemistry are results of production and injection, with injection mainly affecting temperature and chemistry. The amount of production and injection in the WCSB has been substantial. Approximately 23 km3 of water has been injected into the WCSB. Spread out over the geographic area of Calgary (825.3 km2), the injected water would form a lake of 29.1 m depth, approximately the height of a 10-storey building. Increasing the area to the Calgary-Edmonton Corridor, a 38 323 km2 region encompassing the metro areas of Calgary and Edmonton and the area in between, this is equivalent to a water depth of 63 cm. The bulk of the injected water is produced water, with a volume of 20 km3. Monthly production and injection volumes are available through various databases but the associated changes in pressure, temperature and chemistry are not well understood at the regional scale. Details of chemistry and temperature of injected water are not well known. Here, we provide a preliminary analysis of this issue at the basin scale and for selected local areas. Issues appear minor at the basin scale but may create significant risk at the scale of individual developments. Pressure changes at individual wells are not documented in commercially available databases for the WCSB. Most previous efforts to map pressures or hydraulic head in various formations have used screening procedures to eliminate wells affected by production or injection in order to provide maps of background conditions. The current project will examine changes in pressure over time. Preliminary findings indicate that these will not be significant at the basin-scale but will have significant effects on individual pools and could be an important factor in changing cross-formational flow. Injection of water is likely to result in temperature changes at depth. Water is often injected into formations to stimulate further oil production. The water is used to increase the pressure in the formation and drive oil towards the producing well. Injected water is often sourced from production water, a byproduct of oil and gas extraction, and is stored on the surface prior to injection, losing heat over time. Produced water is often not enough, so other sources of water are employed. This makeup water is often sourced from surface water bodies and mixed with produced water before injection, further reducing the temperature of the injected water. The injection of water into formations can potentially alter the thermal regime within the formation, impacting future potential uses including geothermal energy and heat extraction. Calculating the radius of thermal influence around a well from injected water showed that the effects are felt most prominently at the local scale, especially in a dense well field such as the Redwater field. Here, we provide an analysis of the thermal impacts of injected water within the Redwater field. The chemistry of injected water is largely unknown in the WCSB. While injected water is often produced water from the same formation, this is not always the case. Use of surface water or shallow groundwater will result in dilution of brines typically associated with oil and gas production. There has also been an increase in the use of brackish and saline water for enhanced oil recovery and hydraulic fracturing, which will cause changes to water chemistry in the subsurface. Finally, flowback and produced water from hydraulic fracturing is typically injected into higher permeability reservoirs. The implication of mixing these waters with different chemistry has not been assessed at the regional scale. There have been approximately 700 000 wells installed in the WCSB, of which over 200 000 have been abandoned at various construction and abandonment procedures, potentially resulting in leaky wells. The spatial density of wells in the

Please include this code when submitting a data update: GEO2018_532

Retrouver cet article:
Les membres de la Société canadienne de géotechnique peuvent accéder à cet article, ainsi qu'à tous les autres articles de la Conférence Géotechnique Canadienne, dans le Espace membre. Les comptes rendus d'articles sont également disponibles dans de nombreuses bibliothèques.

Citer cet article: