EN FR
GeoConferences.ca

Auteur(e): Li Li

How to obtain representative friction angle of coarse granular materials with not large enough specimens
Akram Deiminiat, Li Li, Jonathan D. Aubertin (GeoCalgary 2022)

IS IT EFFICIENT TO REDUCE SIDEWALL FRICTION BY USING LUBRICANT MATERIALS IN LABORATORY TESTS?
Jian Zheng, Li Li (GeoNiagara 2021)

How to obtain reliable shear strength by direct shear tests: A revision to the minimum required specimen size to dmax ratio of ASTM D3080/D3080M-11
Akram Deiminiat, Li Li, Feitao Zeng (GeoNiagara 2021)

Stability evaluation of side-exposed backfill considering adjacent extraction at different mine depths
Ruofan Wang, Feitao Zeng, Li Li (GeoNiagara 2021)

An overview on the determination of the shear strength of coarse grain materials (rockfills) from small scale laboratory tests
Akram Deiminiat, Li Li, Feitao Zeng, Thomas Pabst, Robert Chapuis, Paul Chiasson (GeoVirtual 2020)

Earth pressure coefficient in a vertical backfilled opening
Jian Zheng, Li Li (GeoVirtual 2020)

Burgers creep model used for describing and predicting the creep behaviour of a rock under uniaxial and triaxial compression test conditions
Ruofan Wang, Li Li (GeoEdmonton 2018)

Analytical and experimental studies of the evolution of the excess pore water pressure during the deposition of a slurried material
Jian Zheng, Li Li (GeoEdmonton 2018)

Analytical solutions to evaluate the evolution of the water table and pore water pressure in stopes with hydraulic fill
Pengyu Yang, Li Li (GeoOttawa 2017)

A conceptual analytical solution for estimating the short-term pressure of paste fill varying from viscous to liquid state, placed in mine stopes
Li Li, Jian Zheng (GeoOttawa 2017)

Analytical solutions of Gibson’s model for estimating the pore water pressures in accreting deposition of slurried material under one-dimensional self-weight consolidation
Jian Zheng, Li Li, Mamert Mbonimpa, Thomas Pabst (GeoOttawa 2017)

An empirical analytical solution for estimating the elastic stresses around typical mine stopes for the Mathews-Potvin stability analyses
Philippe Page, Li Li, Richard Simon (GeoOttawa 2017)

Modélisations physique et numérique du transfert de chaleur 1D et 3D dans le remblai en pâte cimenté curé dans un environnement proche du pergélisol
Fabrice Kazambua Beya, Mamert Mbonimpa, Tikou Belem, Mostafa Benzaazoua, Ugo Marceau, Kayumba Kalonji, Li Li, Serge Ouellet (GeoVancouver 2016)

Auteurs apparentés ou similaires (par ordre alphabétique du nom de famille):